Cotton harvester Hydraulic Motor Pump System Higher Efficiency LPV90+LMF90

Product Description

Highland Stationary crusher hydraulic motor pump system Guarantee the high reliability of the product

· Cast iron housing

· Hydraulic components

· Model LPV90+LMF90

· Power components of hydraulic systems

· Higher efficiency

· Quotations direct quotation

· Simple layout

· System Solutions

· Work fast

· Designed as an alternative solution for selected imported hydraulic motor applications

· Application Stationary crusher

· Patent / Certification Documents Available

· 1 year warranty

Highland Hydraulic motor pump system Description:

Highland Stationary crusher hydraulic motor pump system from Highland of China, we can provide stationary crusher hydraulic motor pump system with high quality, high-performance parameters. Pump is the variable one that is with Charge Pump, and the motor the quantitative, or variable one with valve assembly. The control way of variable displacement pump and motor can be manual or hydraulic operated, and can simply control speed, direction and power of the output shaft of hydraulic motor.

Highland Stationary crusher hydraulic motor pump system user shall ensure that the hydraulic pump uses the correct formulation of the medium to ensure the cleanliness of the operating medium of the equipment, and shall not contain solid particles.

(Self-cleaning filters are recommended) and use this pump/motor wisely!

Highland Hydraulic motor pump system Specifications:

LPV Series Technical parameter

Notices Hydraulic motor pump system:

Hydraulic oil

The suitable replacement period for hydraulic oil in a sealed tank system is 2000 hours, and more often if the hydraulic oil is contaminated with water or other external materials or subjected to abnormal operating conditions.

As a general recommendation, the 10µ inlet oil filter should be replaced every spring or every 1500 hours (whichever occurs first) on a sealed tank system, or in an open tank system with an air filter fill cap. The oil filter should be replaced every 500 hours.

Heat Exchanger

The heat exchanger core and fins are kept clean at all times for maximum cooling and system efficiency, and the exterior of the heat exchanger is checked daily for blockages and cleaned as needed.

Hydraulic motor pump system Tank:

The tank level and the water present in the oil should be checked daily. If the tank must be filled with oil, filtered hydraulic oil must be used, and all water in the tank must be removed as required.

Hydraulic motor pump system Application:

Mixer truck: concrete mixer truck, cement mixer truck;

Coal mining machinery: scraper;

Industry: pharmaceutical machinery;

Transport vehicles: road rollers, concrete pump trucks, stabilized soil mixers

LMF90-23 Factory Production & Inspection Evidence

The LMF90-23 hydraulic motor is built by Shandong Highland Hydraulic Seiko Co., Ltd., with production records identifying each unit. The supplied project documentation records 100 units of this model, and the factory test report identifies the tested motor by component No. 02602260203001.

Factory Evidence

• Model LMF90-23 confirmed in production and project records
• Documented quantity: 100 units
• Tested unit identified by component No. 02602260203001

Evidence Type: Factory Production / Product Identification

LMF90-23 Factory Performance Testing

The LMF90-23 motor is tested on a closed-loop hydraulic motor test bench. The factory test report covers component No. 02602260203001, tested on 2026/2/26 at 15:02 at a test temperature of 23.5 °C with a power recovery ratio of 50%. The unit is rated at 90 mL/rev displacement, 3200 r/min maximum speed and 35 MPa rated pressure.

LMF90-23 Recorded Test Data

The closed-loop report logs speed, pressure, flow, displacement, torque, input power, output power, overall efficiency, volumetric efficiency and charge pressure for the LMF90-23. Selected factory-recorded test points are provided for reference.

• Set 1 — 1243 r/min at 5.5 MPa: 111.4 L/min, 89.6 mL/rev, 74 N·m, 9.6 kW in / 10.2 kW out, 106% overall, 100% volumetric
• Set 1 — 1241 r/min at 17.2 MPa: 108.4 L/min, 89.6 mL/rev, 249 N·m, 32.4 kW in / 31.1 kW out, 96% overall, 97.5% volumetric
• Set 1 — 1236 r/min at 30.1 MPa: 106.5 L/min, 89.6 mL/rev, 442 N·m, 57.2 kW in / 53.4 kW out, 93.4% overall, 96.1% volumetric
• Set 2 — 1270 r/min at 5.7 MPa: 113.9 L/min, 89.7 mL/rev, 82 N·m, 10.9 kW in / 10.8 kW out, 99.2% overall, 100% volumetric
• Set 2 — 1268 r/min at 17.0 MPa: 111.3 L/min, 89.7 mL/rev, 245 N·m, 32.5 kW in / 31.5 kW out, 96.9% overall, 97.9% volumetric
• Set 2 — 1265 r/min at 30.1 MPa: 109.3 L/min, 89.7 mL/rev, 452 N·m, 59.9 kW in / 54.8 kW out, 91.6% overall, 96.3% volumetric

Charge pressure: 1.2 MPa.

Values are reproduced from the original test record and should be interpreted according to the test-bench measurement and calculation method.

LMF90-23 Quality Control & Inspection

Quality control of the LMF90-23 rests on product identification, factory test documentation and engineering specifications. The supplied test report records the motor's displacement, pressure, speed, flow, torque, input power, output power and efficiency during closed-loop testing.

Inspection Evidence

• Product model identification
• Hydraulic motor performance testing
• Pressure and speed verification
• Flow and displacement recording
• Torque and power measurement
• Overall and volumetric efficiency recording
• Engineering interface verification

Inspection scope also covers

• Dimensional inspection
• Surface and finish inspection
• Assembly inspection
• Leakage inspection
• Rotation (CW / CCW) inspection
• Port and interface inspection
• Final inspection before packing

LMF90-23 Engineering Drawing & Interface Data

Drawing data for the LMF70/90 series defines the mounting flange, output shaft spline, hydraulic ports and rotation direction of the LMF90-23. Key interface data includes:

• 33.34 mm dividing circle diameter
• SAE mounting flange, 4 × M12 bolts, 25 mm depth
• L1 / L2 leakage ports: 1 1/16-12
• Speed sensor installation port: 1 1/16-12
• Flushing pressure measuring port: 9/16-18, 15 mm depth
• CW / CCW rotation
• 21-tooth involute output spline
• 16/32 radial pitch
• 30° pressure angle

LMF90-23 Application / Project Evidence

The model is documented in the project record “Variable Piston Pump for Belarus”, listing Shandong Highland Hydraulic Seiko Co., Ltd. as manufacturer, 100 units, and a rye harvester application for a customer in Belarus. The record links the motor to a real harvesting application.

Primary application: Cotton harvesters

Documented project application: Rye harvester — Belarus project

• Project: Variable Piston Pump for Belarus
• Model: LMF90-23
• Quantity: 100 units
• Application: Rye harvester
• Client: Belarus
• Manufacturer: Shandong Highland Hydraulic Seiko Co., Ltd.
• Drive configuration: Closed Circuit Hydraulic System

LMF90-23 Technical Documents

Technical documents covering the LMF90 series include:

The documentation identifies the LMF90 as a closed axial piston motor and gives displacement, speed, pressure, torque, power, temperature and weight data.

Factory Production & Inspection Evidence

The LPV90-MA-R-23 closed axial piston pump is produced by Shandong Highland Hydraulic Seiko Co., Ltd. under documented factory production records. The supplied project record lists a production quantity of 100 units, and the factory test report identifies the tested unit by Component No. 02604200203002.

• LPV – LPV series closed axial piston pump
• 90 – 90 mL/r displacement
• MA – manual servo control
• R – clockwise rotation
• 23 – 23-tooth input shaft (16/32 pitch)

Evidence type: factory production / product identification.

Factory Performance Testing

The LPV90-MA-R-23 is tested on a closed-loop hydraulic pump test bench. The test documentation records Component No. 02604200203002, a test on 2026/4/20 at 9:12, a test temperature of 22.7 °C and a power recovery ratio of 50%. Rated displacement is 90.5 mL/rev and rated pressure is 35 MPa; the test-bench main parameters are a maximum speed of 3200 r/min and a maximum pressure of 42 MPa.

Recorded Test Data

The closed-loop report logs speed, pressure, flow, displacement, torque, input power, output power, overall efficiency, volumetric efficiency and charge pressure for the LPV90-MA-R-23. Selected factory-recorded test points are provided for reference.

Charge pressure: 1.7 MPa; charge flow 22.4 L/min. Values are reproduced from the original test record and should be interpreted according to the test-bench measurement and calculation method.

Engineering Drawing & Dimensions

The supplied LPV70/90-MA-R/L-21/23/14-NN engineering drawing documents the mounting flange, output shaft spline, hydraulic ports, control interface and rotation direction of the LPV90-MA-R-23. Key interface information includes:

• High pressure ports A and B; leakage ports L1 / L2; oil suction port S
• High pressure relief valves A / B; low pressure relief valve
• Pressure taps Ma / Mb: 9/16-18; servo-cylinder pressure taps (both sides): 9/16-18
• Input shaft spline options: 21 teeth (16/32 pitch), 23 teeth (16/32 pitch), 14 teeth (12/24 pitch), 30° pressure angle
• Input shaft dividing circle diameters: Ø33.34 mm (21T) / Ø36.5 mm (23T) / Ø29.63 mm (14T)
• Control handle spline: 1/4-20 UNC-2A, 24 teeth, diametrical pitch 64/128, OD 9.5 mm (SAE 1963)
• Mounting: 4 bolts M12, 25 mm depth; ports L1 / L2 1 1/16-12; port S 1 5/16-12; relief valve options 32 / 35 / 40 MPa; charge/suction pressure 1.8–2.4 MPa
• Rotation direction R (clockwise) / L (anticlockwise)

Drawing technical requirement: minimum speed 500 r/min, maximum speed 3000 r/min, rated working pressure 30 MPa. Interface dimensions should be confirmed against the engineering drawing before installation.

Quality Control & Final Inspection

Quality control of the LPV90-MA-R-23 rests on product identification, factory test documentation and engineering specifications. The test report documents the pump's displacement, pressure, speed, flow and output power recorded during closed-loop testing.

• Product model identification
• Hydraulic pump performance testing
• Pressure and speed verification
• Flow and displacement recording
• Torque and power measurement
• Overall and volumetric efficiency recording
• Engineering interface verification

Dimensional inspection · surface and finish inspection · assembly inspection · leakage inspection · rotation (R / L) inspection · port and interface inspection · final inspection before packing.

Project Reference

The model is documented in the project record for a customer in Belarus. The record lists Shandong Highland Hydraulic Seiko Co., Ltd. as manufacturer, a quantity of 100 units and a rye harvester application.

• Project: Variable Piston Pump for Belarus
• Model: LPV90-MA-R-23
• Quantity: 100 units
• Application: Rye harvester
• Client: Belarus
• Manufacturer: Shandong Highland Hydraulic Seiko Co., Ltd.
• Drive configuration: Closed circuit hydraulic system

Technical Documents

Technical documents available for the LPV90-MA-R-23 include:

These documents provide data on displacement, speed, pressure, torque, power, temperature and weight, and confirm the LPV90 as a closed axial piston pump. The supporting documents are retained with the unit's component number for traceability.

FAQ OF Hydraulic motor pump system

Q1. Can I have a sample order for stationary crusher hydraulic motor pump system?

A: Yes, we welcome sample order to test and check quality.

Q2. What about the lead time?

10 to 15 days for samples, mass production according to MOQ

Q3. Do you have any MOQ limit for stationary crusher hydraulic motor pump system?

A: Low MOQ, 1pc for sample checking is available.

Q4. How do you ship the goods and how long does it take to arrive?

Ship by sea, it generally takes 15-20 days to arrive, and air is also optional.

Q5. How to proceed an order for stationary crusher hydraulic motor pump system?

A: Firstly let us know your requirements or application.

Secondly We quote according to your requirements or our suggestions.

Thirdly customer confirms the samples and places deposit for formal order.

Fourthly We arrange the production.

Q6: Do you offer guarantee for the products?

A: Yes, we offer 1 years warranty to our products.

Q7: How to deal with the faulty?

Firstly, our products are produced in strict quality control system.Secondly, we will inspect the defective pump and motor, and then respond according to the actual situation.

LMF90-23 Technical FAQ

Q: What is the rated displacement of the LMF90-23?

A: The LMF90-23 hydraulic motor has a rated displacement of 90 mL/rev.

Q: What is the continuous working pressure?

A: The continuous working pressure (ΔP) is 30 MPa, with a rated working pressure of 35 MPa and a maximum (transient) working pressure of 38 MPa.

Q: What is the maximum continuous speed?

A: 3200 r/min at full load, with a minimum continuous working speed of 500 r/min.

Q: What type of hydraulic circuit is the LMF90 designed for?

A: The LMF90 is designed for closed-circuit hydraulic systems.

Q: Is an engineering drawing available for installation verification?

A: Yes. An LMF70/90 series engineering drawing is available, covering the mounting flange, output shaft spline, hydraulic ports and rotation direction.

Q: Can the motor be supplied with different control or valve configurations?

A: For details of available control, valve or mounting configurations, please contact us with your application requirements.