LMF110 Lifetime Technical Support Service For Hydraulic Piston Motor Of Combine

Product Description

Highland Mobile crusher hydraulic piston motor strong anti-pollution ability

Quick Detail:

· Cast iron housing

· Hydraulic components

· Model LMF110

· Hydraulic system power components

· Principle hydraulic transmission

· Features overload test

· Simple layout

· System Solutions

· Work fast

· Fully replace imported products

· Patent certificate certification

· Application mobile crusher hydraulic piston motor

· 1 year warranty

Description:

Highland Mobile crusher hydraulic piston motor main features:

1. Mobile crusher hydraulic piston motor have swash plate structure.

3. Mobile crusher hydraulic piston motor are suitable for closed circuit hydraulic system.

4.Mobile crusher hydraulic piston motor have manual servo and hydraulic variable control mode.

5. Mobile crusher hydraulic piston motor are variable displacement pumps with a charging oil pump.

Specifications:

LMF Series Technical parameter

Notices:

Hydraulic oil

The suitable replacement period for hydraulic oil in a sealed tank system is 2000 hours, and more often if the hydraulic oil is contaminated with water or other external materials or subjected to abnormal operating conditions.

As a general recommendation, the 10µ inlet oil filter should be replaced every spring or every 1500 hours (whichever occurs first) on a sealed tank system, or in an open tank system with an air filter fill cap. The oil filter should be replaced every 500 hours.

Heat Exchanger

The heat exchanger core and fins are kept clean at all times for maximum cooling and system efficiency, and the exterior of the heat exchanger is checked daily for blockages and cleaned as needed.

Application:

Mixer truck: concrete mixer truck, cement mixer truck;

Coal mining machinery: scraper;

Industry: pharmaceutical machinery;

Transport vehicles: road rollers, concrete pump trucks, stabilized soil mixers

Factory Production & Inspection Evidence

The LMF110-23 hydraulic motor is built by Shandong Highland Hydraulic Seiko Co., Ltd., and its manufacture is backed by factory production records. The project documentation supplied for this model records a delivery of 100 units, and the accompanying factory test report carries component No. 02307040203632, so the tested unit can be matched to its production record.

Factory Evidence

• Model LMF110-23 confirmed by production and project records
• Delivery quantity of 100 units recorded
• Tested unit identified by component No. 02307040203632

Evidence Type: Factory Production / Product Identification

Factory Performance Testing

The LMF110-23 is verified on a closed-loop hydraulic motor test bench. The factory test report covers component No. 02307040203632, tested on 2023/7/4 at 10:20, at a test temperature of 44.4 °C and a power recovery ratio of 50%. The unit is rated at 110 mL/rev displacement, 2900 r/min maximum speed and 35 MPa rated pressure.

Recorded Test Data

The closed-loop report logs speed, pressure, flow, displacement, torque, input power, output power, overall efficiency, volumetric efficiency and charge pressure. Selected measurement points are listed below.

• 1228 r/min · 5.5 MPa · 136.2 L/min · 110.9 mL/rev · 99 N·m · 12.7 kW in / 12.5 kW out · 98.1% overall · 100% volumetric
• 1226 r/min · 17.3 MPa · 133.3 L/min · 110.9 mL/rev · 311 N·m · 39.9 kW in / 38.4 kW out · 96.3% overall · 98% volumetric
• 1221 r/min · 31.3 MPa · 130.0 L/min · 110.9 mL/rev · 565 N·m · 72.2 kW in / 67.8 kW out · 93.9% overall · 96% volumetric
• Charge pressure: 1.2 MPa

Quality Control & Inspection

Quality control for the LMF110-23 combines product identification, factory test documentation and engineering specifications. The supplied test report records the motor's displacement, pressure, speed, flow, torque, input power, output power and efficiency during closed-loop testing.

Inspection Evidence

• Product model identification
• Hydraulic motor performance testing
• Pressure and speed verification
• Flow and displacement recording
• Torque and power measurement
• Overall and volumetric efficiency recording
• Engineering interface verification

Engineering Drawing

The LMF110/130 series engineering drawing documents the mounting flange, output shaft spline, hydraulic ports and rotation direction of the LMF110-23. Key interface data includes:

• 23-tooth involute output spline
• 16/32 radial pitch, module 1.588
• 30° pressure angle
• 36.52 mm dividing circle diameter
• SAE mounting flange, 4 × M12 bolts, 25 mm depth
• L1 / L2 leakage ports: 1 5/16-12
• Speed sensor installation port: 1 5/16-12
• Flushing pressure measuring port: 9/16-18, 15 mm depth
• CW / CCW rotation

Application / Project Evidence

The LMF110-23 is referenced in the project record “Variable Piston Pump for Russia”. The record names Shandong Highland Hydraulic Seiko Co., Ltd. as the manufacturer, lists 100 units and identifies a wheat harvester application for a customer in Russia.

Project Evidence

• Project: Variable Piston Pump for Russia
• Model: LMF110-23
• Quantity: 100 units
• Application: Wheat Harvester
• Client: Russia
• Manufacturer: Shandong Highland Hydraulic Seiko Co., Ltd.
• Drive configuration: Closed Circuit Hydraulic System

Technical Documents

Technical documentation available for the LMF110 series includes:

• LMF110-23 hydraulic motor technical parameters
• Closed-loop hydraulic motor test report
• LMF110/130 engineering drawing
• Output shaft spline specifications
• Model selection table
• Hydraulic motor operating parameters

The documentation identifies the LMF110 as a closed axial piston motor and gives displacement, speed, pressure, torque, power, temperature and weight data.

FAQ

Q1. Can I have a sample order for mobile crusher hydraulic piston motor?

A: Yes, we welcome sample order to test and check quality.

Q2. What about the lead time?

10 to 15 days for samples, mass production according to MOQ

Q3. Do you have any MOQ limit for mobile crusher hydraulic piston motor?

A: Low MOQ, 1pc for sample checking is available.

Q4. How do you ship the goods and how long does it take to arrive?

Ship by sea, it generally takes 15-20 days to arrive, and air is also optional.

Q5. How to proceed an order for mobile crusher hydraulic piston motor?

A: Firstly let us know your requirements or application.

Secondly We quote according to your requirements or our suggestions.

Thirdly customer confirms the samples and places deposit for formal order.

Fourthly We arrange the production.

Q6: Do you offer guarantee for the products?

A: Yes, we offer 1 years warranty to our products.

Q7: How to deal with the faulty?

Firstly, our products are produced in strict quality control system.Secondly, we will inspect the defective pump and motor, and then respond according to the actual situation.