LPV110 Hydraulic Motor Pump System For Agriculture Sustainable Farming Solutions

Product Description

Highland Enhancing Agricultural Efficiency: Harnessing the Power of the HPV110 Hydraulic Motor Pump System

· cast iron housing

· hydraulic components

· Power components of hydraulic systems

· higher efficiency

· Simple layout

· System Solutions

· work fast

· Fully replace imported products

· Patent certificate certification

· 1 year warranty

· Application rice harvester

· Category Variable displacement axial piston pump

Highland Hydraulic Motor Pump System System Solutions information: 

Experience innovation in action with hydraulic motor pump systems that are transforming the face of agriculture. This advanced exploration provides a detailed look at the engineering marvels that power today's farming equipment. Explore the intricacies of hydraulic components, such as pumps, motors, and valves, and their synchronized operation to deliver precision and reliability on the farm. Learn how these systems enhance the efficiency of agricultural machinery, allowing professionals to tackle challenging tasks with ease while ensuring sustainable and productive farming practices.

Specifications:

Highland Hydraulic Motor Pump System technical parameter

Highland Hydraulic Motor Pump System notices:

Ensure that the hydraulic fluid you use has adequate thermal stability, especially in high-temperature environments. This stability prevents the formation of varnish and sludge, which can clog valves and lead to system inefficiencies. Use specialized thermal stability additives when necessary.

Highland Hydraulic Motor Pump System use:

Mixer truck: concrete mixer truck, cement mixer truck;

Coal mining machinery: scraper;

Industry: pharmaceutical machinery;

Transport vehicles: road rollers, concrete pump trucks, stabilized soil mixers

Factory Production & Inspection Evidence

Each LPV110-MA-R-23 unit is produced by Shandong Highland Hydraulic Seiko Co., Ltd., with production information recorded for traceability. The supplied project record lists a production quantity of 100 units, and the factory test report identifies the tested unit by Component No. 02601310203001.

• LPV – LPV series closed axial piston pump
• 110 – 110 mL/r displacement
• MA – manual servo control
• R – clockwise rotation
• 23 – 23-tooth input shaft (16/32 pitch)

Evidence type: factory production / product identification.

Factory Performance Testing

The LPV110-MA-R-23 is evaluated on the factory closed-loop hydraulic pump test bench. The test documentation records Component No. 02601310203001, a test on 2025/1/31 at 15:32, a test temperature of 24.3 °C and a power recovery ratio of 50%. Rated displacement is 110 mL/rev and rated pressure is 35 MPa; the test-bench main parameters are a maximum speed of 2900 r/min and a maximum pressure of 42 MPa.

Recorded Test Data

The closed-loop report records speed, pressure, flow, displacement, torque, input power, output power, overall and volumetric efficiency, and charge pressure for the LPV110-MA-R-23. Selected test points are listed for reference.

Charge pressure: 1.7 MPa; charge flow 28.3 L/min. All values are taken directly from the original test record and depend on the test-bench measurement and calculation method.

Engineering Drawing & Dimensions

Interface information for the LPV110-MA-R-23 is given in the supplied LPV110-MA-R/L-23/13/14-NN engineering drawing, covering the mounting flange, output shaft spline, hydraulic ports, control interface and rotation direction. Key interface information includes:

• High pressure ports A and B; leakage ports L1 / L2; oil suction port S
• High pressure relief valves A / B; low pressure relief valve
• Pressure taps Ma / Mb: 9/16-18; servo-cylinder pressure taps (both sides): 9/16-18
• Input shaft spline options: 23 teeth (16/32 pitch), 13 teeth (8/16 pitch), 14 teeth (12/24 pitch), 30° pressure angle
• Input shaft dividing circle diameters: Ø36.5 mm (23T) / Ø41.38 mm (13T) / Ø29.63 mm (14T)
• Control handle spline: 1/4-20 UNC-2A, 24 teeth, diametrical pitch 64/128, OD 9.5 mm (SAE 1963)
• Mounting threaded hole M12, 25 mm depth; relief valve options 32 / 35 / 40 MPa; charge/suction pressure 1.8–2.4 MPa
• Rotation direction R (clockwise) / L (anticlockwise)

Drawing technical requirement: minimum speed 500 r/min, maximum speed 2900 r/min, rated working pressure 30 MPa. Interface dimensions should be confirmed against the engineering drawing before installation.

Quality Control & Final Inspection

For the LPV110-MA-R-23, quality control combines product identification, factory test documentation and engineering specifications. The test report documents the pump's displacement, pressure, speed, flow and output power recorded during closed-loop testing.

• Product model identification
• Hydraulic pump performance testing
• Pressure and speed verification
• Flow and displacement recording
• Torque and power measurement
• Overall and volumetric efficiency recording
• Engineering interface verification

Dimensional inspection · surface and finish inspection · assembly inspection · leakage inspection · rotation (R / L) inspection · port and interface inspection · final inspection before packing.

Project Reference

This pump model appears in the project record for a Russia-based customer. The record lists Shandong Highland Hydraulic Seiko Co., Ltd. as manufacturer, a quantity of 100 units and a wheat harvester application.

• Project: Variable Piston Pump for Russia
• Model: LPV110-MA-R-23
• Quantity: 100 units
• Application: Wheat harvester
• Client: Russia
• Manufacturer: Shandong Highland Hydraulic Seiko Co., Ltd.
• Drive configuration: Closed circuit hydraulic system

Technical Documents

Technical documents available for the LPV110-MA-R-23 include:

These documents cover displacement, speed, pressure, torque, power, temperature and weight, and confirm the model as a closed axial piston pump. The referenced documents are kept on file with the unit's component number.

Highland Hydraulic Motor Pump System FAQ

Q1. Can I have a sample order for hydraulic motor pump system?

A: Yes, we welcome sample order to test and check quality.

Q2. What about the hydraulic motor pump system lead time?

10 to 15 days for samples, mass production according to MOQ

Q3. Do you have any MOQ limit for hydraulic motor pump system?

A: Low MOQ, 1pc for sample checking is available.

Q4. How do you ship the hydraulic motor pump system and how long does it take to arrive?

Ship by sea, it generally takes 15-20 days to arrive, and air is also optional.

Q5. How to proceed an order for hydraulic motor pump system

A: Firstly let us know your requirements or application.

Secondly We quote according to your requirements or our suggestions.

Thirdly customer confirms the samples and places deposit for formal order.

Fourthly We arrange the production.

Q6: Do you offer guarantee for the hydraulic motor pump system?

A: Yes, we offer 1 years warranty to our products.

Q7: How to deal with the faulty hydraulic motor pump system?

Firstly, our products are produced in strict quality control system.Secondly, we will inspect the defective pump and motor, and then respond according to the actual situation.

Whatsapp/wechat/phone:+86 18678785446

E-mail:ld@hldhydraulic.com

QQ:545353883