Hydraulic Travel Drives for Changing Loads
Construction machinery often operates under changing loads and requires controlled movement in confined working areas. For a road roller, each working pass involves starting, adjusting travel speed, slowing down, and changing direction. The hydraulic travel system must respond to these demands throughout the workday.
HIGHLAND HPV Series for Closed-Loop Systems
HIGHLAND’s HPV series variable-displacement axial piston pumps are designed for closed-loop hydraulic systems. The product range is intended for mobile applications, including construction and road-building machinery. HPV series product information

Speed and Direction Control Through the Pump
In a compatible hydrostatic travel drive, the pump supplies oil to the hydraulic motor. Adjusting pump displacement changes the flow delivered to the motor, allowing travel speed to vary. Reversing the flow changes the motor’s direction, supporting forward and reverse movement through the machine’s drive arrangement.
Internal Charge Pump and Compact Design
The HPV series features an internal cycloidal gear charge pump and a compact structural design. For equipment manufacturers, these features can be considered when planning the charge circuit and arranging components within the chassis.
Selecting the Correct Pump
Selecting the correct pump requires attention to machine weight, required travel speed, operating pressure, motor displacement, and available engine power. The control configuration must also match the machine’s operating requirements.
Repair and Replacement Checks
For repair and replacement work, technicians should check the mounting flange, shaft, ports, rotation direction, and control connections. Cooling, filtration, and charge-system condition are also part of the complete drive assessment.
An Option for Matched Closed-Loop Travel Systems
For construction machinery manufacturers and service companies, HPV pumps provide an option to evaluate for matched closed-loop travel systems.