Mobile Crusher Hmf90 Axial Hydraulic Motor For Hydraulic Drive System

Product Description

Highland HMF90 Axial Hydraulic Motor Is Easy To Operate,Hydraulic Drive System

Quick Detail:

·Cast iron housing

·Hydraulic components

·Model HMF130

·Hydraulic system power components

·Principle hydraulic transmission

·Features easy maintenance

·Simple layout

·System Solutions

·Work fast

·Fully replace imported products

·Patent certificate certification

·Application mobile crusher heavy duty hydraulic motors

·1 year warranty

Description:

Highland heavy duty hydraulic motors advantages:

Advantages: high pressure resistance, compact structure, high efficiency, and convenient flow adjustment, large transmission power, wide speed range, long life, but piston pumps have strict requirements on the cleanliness of the working medium.

heavy duty hydraulic motors product information:

heavy duty hydraulic motors is an important device in the hydraulic system. It relies on the reciprocating motion of the plunger in the cylinder body to change the volume of the sealed working chamber to achieve oil absorption and oil pressure. heavy duty hydraulic motors have the advantages of high rated pressure, compact structure, high efficiency and convenient flow adjustment. They are widely used in occasions where high pressure, large flow and flow need to be adjusted.

Hydraulic oil motor are piston or piston reciprocating direction parallel to the cylinder center axis of the Piston pump. The hydraulic oil motor uses the volume change produced by the reciprocating movement of the plunger in the plunger hole parallel to the drive shaft to work. Because the plunger and plunger hole are round parts, high precision can be achieved, so the volume efficiency is high.

Optimized design: Compactness appearance make operating your machine as simple as possible

still providing best quality at highest standards.

Clean and flexibility: The lightweight, compact design. Precise control and reliable quality and performance.

Wide range of displacements: Offering a range of motor with 30-130 cm² per round.

High pressure capability: Working with 420 bar transient pressure.

Highland HMF Series Technical parameter:

Notices:

Hydraulic oil

The suitable replacement period for hydraulic oil in a sealed tank system is 2000 hours, and more often if the hydraulic oil is contaminated with water or other external materials or subjected to abnormal operating conditions.

As a general recommendation, the 10µ inlet oil filter should be replaced every spring or every 1500 hours (whichever occurs first) on a sealed tank system, or in an open tank system with an air filter fill cap. The oil filter should be replaced every 500 hours.

Heat Exchanger

The heat exchanger core and fins are kept clean at all times for maximum cooling and system efficiency, and the exterior of the heat exchanger is checked daily for blockages and cleaned as needed.

Application:

Mixer truck: concrete mixer truck, cement mixer truck;

Coal mining machinery: scraper;

Industry: pharmaceutical machinery;

Transport vehicles: road rollers, concrete pump trucks, stabilized soil mixers

Factory Production & Quality Inspection

Actual Factory Photograph

Captured during production and inspection, this hydraulic motor is shown on the factory floor. The photograph makes it possible to check the product configuration, housing, drive shaft and external ports by eye.

Inspection Focus

HMF90 Factory Production & Inspection Evidence

Before the HMF90-23 motor is shipped it passes a documented production and inspection stage, with the machine photographed on the factory floor. That evidence is listed below.

Factory Evidence

• Actual hydraulic motor photographed on the factory floor
• Product housing and drive shaft visually inspected before shipment
• Port and mounting configuration checked against the applicable model specification
• Final inspection performed according to the product's technical requirements

Evidence Type: Factory Production / Visual Inspection

Application: Hydraulic motor systems

Product Status: Production / Pre-shipment Inspection

HMF90 Factory Performance Testing

Each HMF90-23 is performance-tested on the closed-loop bench prior to delivery. Component No. 02603280203005 was run on 2026/3/28 at 10:01 at 23.5 ℃, evaluated at a 90 mL/rev rated displacement, 3200 r/min maximum speed and 38 MPa maximum pressure (rated 35 MPa). The recorded power-recovery ratio is 50 %.

HMF90 Recorded Test Data

Test-bench output for the HMF90-23 motor, as recorded (component No. 02603280203005; 2026/3/28 10:01; 23.5 ℃; charge pressure 1.2 MPa):

The values above are taken unaltered from the factory test report; charge pressure is held at 1.2 MPa.

HMF90 Quality Control & Inspection

Every HMF90-23 follows a set inspection sequence. After assembly it is bench-run on the closed-loop motor stand, where displacement, working pressure, speed, flow and torque are recorded, overall and volumetric efficiency are verified and leakage is checked; approval requires all values to be within specification.

HMF90 Engineering Drawing

The HMF90-23 shares the HMF70/90 series motor drawing. Its output shaft is an involute spline at 16/32 radial pitch and 30° pressure angle. The SAE flange is fixed with four M12 bolts at 25 mm depth. High-pressure ports A and B use 7/8-14 UNF-2B threads; L1 and L2 are the leakage ports; the speed-sensor port takes 7/8-14 UNF-2B; and the flushing- and relief-valve pressure taps are 9/16-18, 15 mm deep. Both CW and CCW rotation are offered.

HMF90 Application / Project Evidence

The HMF90-23 closed axial piston motor was built for a rye harvester programme in Belarus. The order — referenced internally as “Variable Piston Pump for Belarus” — totalled 100 units and was shipped to a Belarus-based customer, with Shandong Lande Hydraulic Precision Co., Ltd. as manufacturer. On the machine the motor sits in the closed-circuit hydrostatic drive, carrying the travelling and header/work-function loads. The details below come from that delivery's project records.

HMF90 Technical Documents

The HMF90 motor is backed by a set of technical documents that record its performance ratings, test evidence and installation dimensions. The items below are the documents held for this product and are available to qualified buyers on request.

• HMF90 motor technical parameter sheet
• Closed-loop hydraulic motor test report (component No. 02603280203005)
• Engineering / outline drawing (HMF70/90 series)
• Model selection table (displacement and output shaft)

These documents can be requested through our sales team.

FAQ

Q1. Can I have a sample order for mobile crusher heavy duty hydraulic motors ?

A: Yes, we welcome sample order to test and check quality.

Q2. What about the lead time?

10 to 15 days for samples, mass production according to MOQ

Q3. Do you have any MOQ limit for mobile crusher heavy duty hydraulic motors ?

A: Low MOQ, 1pc for sample checking is available.

Q4. How do you ship the goods and how long does it take to arrive?

Ship by sea, it generally takes 15-20 days to arrive, and air is also optional.

Q5. How to proceed an order for mobile crusher heavy duty hydraulic motors ?

A: Firstly let us know your requirements or application.

Secondly We quote according to your requirements or our suggestions.

Thirdly customer confirms the samples and places deposit for formal order.

Fourthly We arrange the production.

Q6: Do you offer guarantee for the products?

A: Yes, we offer 1 years warranty to our products.

Q7: How to deal with the faulty?

A: Firstly, our products are produced in strict quality control system.Secondly, we will inspect the defective pump and motor, and then respond according to the actual situation