Roller Heavy Duty Hydraulic Motor 42mpa Easy Maintenance

Product Description

Highland Roller Heavy duty hydraulic motor Additional pumps can be connected in series

Quick Detail:

·Cast iron housing

·Hydraulic components

·Model HMF110

·Hydraulic system power components

·Principle hydraulic transmission

·Features easy maintenance

·Simple layout

·System Solutions

·Work fast

·Fully replace imported products

·Patent certificate certification

·Application mobile crusher heavy duty hydraulic motors

·1 year warranty

Description:

Highland Heavy duty hydraulic motors features:

Highland Heavy duty hydraulic motors is to convert the power into hydraulic energy (displacement and pressure), and then output by hydraulic motor to mechanical energy (speed and torque), providing power for the large machinery

First of all, the parts constituting the sealed volume are cylindrical plungers and cylinder holes, which are easy to process, can obtain high matching accuracy, have good sealing performance, and still have high volumetric efficiency under high pressure.

Second, the main parts in the heavy duty hydraulic motors are all subject to compressive stress, and the material strength properties can be fully utilized.

HMF Series Technical parameter:

Notices:

Hydraulic oil

The suitable replacement period for hydraulic oil in a sealed tank system is 2000 hours, and more often if the hydraulic oil is contaminated with water or other external materials or subjected to abnormal operating conditions.

As a general recommendation, the 10µ inlet oil filter should be replaced every spring or every 1500 hours (whichever occurs first) on a sealed tank system, or in an open tank system with an air filter fill cap. The oil filter should be replaced every 500 hours.

Heat Exchanger

The heat exchanger core and fins are kept clean at all times for maximum cooling and system efficiency, and the exterior of the heat exchanger is checked daily for blockages and cleaned as needed.

Application:

Mixer truck: concrete mixer truck, cement mixer truck;

Coal mining machinery: scraper;

Industry: pharmaceutical machinery;

Transport vehicles: road rollers, concrete pump trucks, stabilized soil mixers

HMF130 Factory Production & Inspection Evidence

This motor was recorded on the factory floor while undergoing production and inspection. Photographs of this kind give direct visual proof of the genuine product configuration, including housing, shaft and port arrangement, as verified before shipment.

Factory Evidence

• The actual motor unit photographed in the factory
• Housing and drive shaft given a visual inspection ahead of shipment
• Mounting and port arrangement checked to the applicable model specification
• Completed a final inspection per the product’s technical requirements

Evidence Type: Factory Production / Visual Inspection

Application: Hydraulic motor systems

Product Status: Production / Pre-shipment Inspection

Actual Factory Photo — Hydraulic Motor During Production & Inspection

Each HMF130-23 is performance-tested on the closed-loop bench prior to delivery. Component No. 02604080203001 was run on 2026/4/8 at 11:23 at 30 ℃, evaluated at a 130 mL/rev rated displacement, 2900 r/min maximum speed and 38 MPa maximum pressure (rated 35 MPa). The recorded power-recovery ratio is 20 %.

HMF130 Recorded Test Data

Below is the recorded test data set for the HMF130-23 motor (component No. 02604080203001; run 2026/4/8 11:23; 30 ℃; charge pressure 1.2 MPa):

Figures are reproduced verbatim from the factory test sheet; charge pressure is constant at 1.2 MPa.

HMF130 Quality Control & Inspection

The HMF130-23 is inspected on the closed-loop test rig. Each assembled motor is run to confirm displacement, speed, working pressure, flow and torque, to validate overall and volumetric efficiency, and to check for leakage; release is granted only when the readings are within the limits. The test documentation provided for this motor is representative of the process.

HMF130 Engineering Drawing

The drawing for the HMF130-23 is the HMF110/130-21/23 axial piston motor sheet. Shaft: involute spline, 23 teeth at 16/32 pitch, module 1.588, 30° pressure angle, pitch-circle diameter 36.52 mm. Four M12 bolts at 25 mm depth secure the SAE flange. Main ports A/B are 7/8-14 UNF-2B; L1/L2 are leakage ports; flushing- and relief-valve pressure taps are 9/16-18, 15 mm deep. Both rotation directions are available.

HMF130 Application / Project Evidence

The HMF130-23 closed axial piston motor featured here belongs to the “Variable Piston Pump for Kyrgyzstan” project. Fifty units were manufactured and supplied to the Kyrgyzstan customer for potato-harvester use, mounted in the machine’s closed-circuit hydrostatic drive for both travel and harvesting motions. The project record of this delivery is summarised below.

HMF130 Technical Documents

A complete document set accompanies the HMF130 motor, from its technical parameter sheet through to the factory test report and outline drawing. The documents listed here are those held for this product and are released to qualified buyers on request.

• HMF130 motor technical parameter sheet
• Closed-loop hydraulic motor test report (component No. 02604080203001)
• Engineering / outline drawing (HMF110/130-21/23)
• Model selection table (displacement and output shaft)

To obtain these documents, please contact our sales team.

FAQ

 

Q1. Can I have a sample order for mobile crusher heavy duty hydraulic motors ?

A: Yes, we welcome sample order to test and check quality.

 

Q2. What about the lead time?

10 to 15 days for samples, mass production according to MOQ

 

Q3. Do you have any MOQ limit for mobile crusher heavy duty hydraulic motors ?

A: Low MOQ, 1pc for sample checking is available.

 

Q4. How do you ship the goods and how long does it take to arrive?

Ship by sea, it generally takes 15-20 days to arrive, and air is also optional.

 

Q5. How to proceed an order for mobile crusher heavy duty hydraulic motors ?

A: Firstly let us know your requirements or application.

Secondly We quote according to your requirements or our suggestions.

Thirdly customer confirms the samples and places deposit for formal order.

Fourthly We arrange the production.

 

Q6: Do you offer guarantee for the products?

A: Yes, we offer 1 years warranty to our products.

 

Q7: How to deal with the faulty?

A: Firstly, our products are produced in strict quality control system.Secondly, we will inspect the defective pump and motor, and then respond according to the actual situation