Pounding Cart Heavy Duty Hydraulic Motor Additional Pumps Can Be Connected In Series

Product Description

Highland Pounding cart Heavy duty hydraulic motor Additional pumps can be connected in series

Quick Detail:

·Cast iron housing

·Hydraulic components

·Model HMF110

·Hydraulic system power components

·Principle hydraulic transmission

·Features easy maintenance

·Simple layout

·System Solutions

·Work fast

·Fully replace imported products

·Patent certificate certification

·Application mobile crusher heavy duty hydraulic motors

·1 year warranty

Description:

Highland Heavy duty hydraulic motors features:

Highland Heavy duty hydraulic motors is a hydraulic motor that relies on the reciprocating motion of the piston in the cylinder to cause the change of the sealing volume to achieve oil suction and oil pressure. This motor has many advantages.

Highland Heavy duty hydraulic motors is to convert the power into hydraulic energy (displacement and pressure), and then output by hydraulic motor to mechanical energy (speed and torque), providing power for the large machinery

Highland HMF Series Technical parameter:

Notices:

Hydraulic oil

The suitable replacement period for hydraulic oil in a sealed tank system is 2000 hours, and more often if the hydraulic oil is contaminated with water or other external materials or subjected to abnormal operating conditions.

As a general recommendation, the 10µ inlet oil filter should be replaced every spring or every 1500 hours (whichever occurs first) on a sealed tank system, or in an open tank system with an air filter fill cap. The oil filter should be replaced every 500 hours.

Heat Exchanger

The heat exchanger core and fins are kept clean at all times for maximum cooling and system efficiency, and the exterior of the heat exchanger is checked daily for blockages and cleaned as needed.

Application:

Mixer truck: concrete mixer truck, cement mixer truck;

Coal mining machinery: scraper;

Industry: pharmaceutical machinery;

Transport vehicles: road rollers, concrete pump trucks, stabilized soil mixers

HMF130 Factory Production & Inspection Evidence

A camera record was made of this hydraulic motor during our production and inspection routine. Factory-floor photography provides immediate visual evidence of the true product configuration — housing, drive shaft and port arrangement — ahead of shipment.

Factory Evidence

• Hydraulic motor photographed on the production floor
• Product housing and drive shaft checked visually before being shipped
• Port and mounting configuration validated against the model specification in force
• Final inspection executed according to the product’s technical requirements

Evidence Type: Factory Production / Visual Inspection

Application: Hydraulic motor systems

Product Status: Production / Pre-shipment Inspection

Actual Factory Photo — Hydraulic Motor During Production & Inspection

A closed-loop hydraulic motor test is performed on every HMF130-23 before it leaves the works. The test sheet for component No. 02604080203001, taken on 2026/4/8 at 11:23 and 30 ℃, quotes a rated displacement of 130 mL/rev, a maximum speed of 2900 r/min and a maximum pressure of 38 MPa (rated 35 MPa); the power-recovery ratio reads 20 %.

HMF130 Recorded Test Data

Test-bench output for the HMF130-23 motor, as recorded (component No. 02604080203001; 2026/4/8 11:23; 30 ℃; charge pressure 1.2 MPa):

The data are transcribed from the original report without alteration; charge pressure is 1.2 MPa.

HMF130 Quality Control & Inspection

Acceptance testing forms the core of HMF130-23 quality control. After assembly the motor is operated on the closed-loop bench to verify displacement, speed, pressure, flow, torque and overall/volumetric efficiency, with a leakage check included; it is passed only if the figures comply with specification. The supplied test report illustrates this standing inspection routine.

HMF130 Engineering Drawing

Dimensioning follows the HMF110/130-21/23 motor drawing. The HMF130-23 output shaft is a 23-tooth involute spline (16/32 pitch), module 1.588, pressure angle 30°, pitch-circle diameter 36.52 mm. It mounts on a SAE flange with four M12 bolts, 25 mm deep; high-pressure ports A and B are threaded 7/8-14 UNF-2B, leakage ports are L1 and L2, and the flushing/relief-valve pressure taps are 9/16-18, 15 mm deep. CW and CCW rotation are both supported.

HMF130 Application / Project Evidence

Proven in the field on a Kyrgyzstan potato harvester, this HMF130-23 motor formed part of a 50-unit batch (project “Variable Piston Pump for Kyrgyzstan”) delivered to a Kyrgyzstan client. It operates inside the closed-circuit hydrostatic system, driving the harvester’s travel and working functions. The following evidence is drawn from the project file of this shipment.

HMF130 Technical Documents

Technical documentation for the HMF130 motor covers the product’s ratings, its closed-loop test results and its mounting interface. The list below sets out the documents maintained for this product, which can be made available to qualified buyers on request.

• HMF130 motor technical parameter sheet
• Closed-loop hydraulic motor test report (component No. 02604080203001)
• Engineering / outline drawing (HMF110/130-21/23)
• Model selection table (displacement and output shaft)

Our sales team will arrange supply of these documents on request.

FAQ

 

Q1. Can I have a sample order for mobile crusher heavy duty hydraulic motors ?

A: Yes, we welcome sample order to test and check quality.

 

Q2. What about the lead time?

10 to 15 days for samples, mass production according to MOQ

 

Q3. Do you have any MOQ limit for mobile crusher heavy duty hydraulic motors ?

A: Low MOQ, 1pc for sample checking is available.

 

Q4. How do you ship the goods and how long does it take to arrive?

Ship by sea, it generally takes 15-20 days to arrive, and air is also optional.

 

Q5. How to proceed an order for mobile crusher heavy duty hydraulic motors ?

A: Firstly let us know your requirements or application.

Secondly We quote according to your requirements or our suggestions.

Thirdly customer confirms the samples and places deposit for formal order.

Fourthly We arrange the production.

 

Q6: Do you offer guarantee for the products?

A: Yes, we offer 1 years warranty to our products.

 

Q7: How to deal with the faulty?

A: Firstly, our products are produced in strict quality control system.Secondly, we will inspect the defective pump and motor, and then respond according to the actual situation