Agricultural Machinery Hydraulic Motor Pump System Customized LPV130

Product Description

Highland Agricultural machinery hydraulic pump motor system customized LPV130

· cast iron housing

· hydraulic components

· Power components of hydraulic systems

· higher efficiency

· Simple layout

· System Solutions

· work fast

· Fully replace imported products

· Patent certificate certification

· 1 year warranty

· Application rice harvester

· Category Variable displacement axial piston pump

Highland Hydraulic Motor Pump System System Solutions information

Enhance your agricultural machinery with our customized HPV130 Hydraulic Pump Motor System. Specifically designed for the rigors of farming operations, this system significantly improves the efficiency, reliability, and performance of your equipment. The HPV130 system is a sturdy, high-performance solution that caters to the specific needs of agricultural machinery, ensuring seamless operations even under demanding work conditions. With its top-tier design and technology, it provides a noteworthy improvement in the productivity and lifespan of your machinery, becoming an essential addition to your agricultural operations.

Specifications:

Highland Hydraulic Motor Pump System technical parameter

Highland Hydraulic Motor Pump System notices:

Operator Training: Operators must be properly trained in the use and operation of the HPV130 hydraulic pump motor system. This includes understanding all safety regulations and operational procedures.

Regular Inspections: Before each use, a thorough inspection of the hydraulic pump motor system should be carried out to check for any signs of wear, leaks, or other potential issues.

Hydraulic Oil Maintenance: The hydraulic oil's quality and level should be regularly checked and maintained. If the oil is contaminated or degraded, it should be replaced immediately.

Preventing Overheating: Long periods of operation can lead to the system overheating. The temperature of the hydraulic system should be regularly monitored, and appropriate cooling measures should be taken when necessary.

Correct Operation: The HPV130 hydraulic pump motor system should always be operated as per the manufacturer's instructions. Incorrect operation can cause the system to malfunction and may result in equipment damage or personal injury.

Proper Storage: When not in use, the hydraulic pump should be stored in a dry, clean, and dust-free environment to prevent rust or contamination.

Professional Maintenance: If there is a decrease in system performance or a malfunction, stop using it immediately and have a professional technician inspect and repair it. Do not attempt to solve the problem on your own, as this could lead to further equipment damage.

Highland Hydraulic Motor Pump System use:

Mixer truck: concrete mixer truck, cement mixer truck;

Coal mining machinery: scraper;

Industry: pharmaceutical machinery;

Transport vehicles: road rollers, concrete pump trucks, stabilized soil mixers

Factory Production & Inspection Evidence

The LPV130-MA-R-23 pump is manufactured and identified under factory production documentation issued by Shandong Highland Hydraulic Seiko Co., Ltd. The supplied project record lists a production quantity of 50 units, and the factory test report identifies the tested unit by Component No. 02407110203001.

• LPV – LPV series closed axial piston pump
• 130 – 130 mL/r displacement
• MA – manual servo control
• R – clockwise rotation
• 23 – 23-tooth input shaft (16/32 pitch)

Evidence type: factory production / product identification.

Factory Performance Testing

The LPV130-MA-R-23 pump undergoes closed-loop bench testing as part of factory performance verification. The test documentation records Component No. 02407110203001, a test on 2024/7/11 at 10:07, a test temperature of 36.8 °C and a power recovery ratio of 50%. Rated displacement is 130 mL/rev and rated pressure is 35 MPa; the test-bench main parameters are a maximum speed of 2900 r/min and a maximum pressure of 42 MPa.

Recorded Test Data

For the LPV130-MA-R-23, the closed-loop report logs speed, pressure, flow, displacement, torque, input power, output power, overall efficiency, volumetric efficiency and charge pressure. Selected recorded points are shown for reference.

Charge pressure: 1.8 MPa; charge flow 34.2 L/min. Figures are reproduced from the original test record; interpretation should follow the test-bench measurement and calculation method.

Engineering Drawing & Dimensions

The LPV130/160-MA-R/L-27/13-NN engineering drawing provides the mounting flange, output shaft spline, hydraulic port, control interface and rotation-direction data for the LPV130-MA-R-23. Key interface information includes:

• High pressure ports A and B; leakage ports L1 / L2; oil suction port S
• High pressure relief valves A / B; low pressure relief valve
• Pressure taps Ma / Mb: 9/16-18; servo-cylinder pressure taps (both sides): 9/16-18
• Output shaft involute spline: 13 teeth, radial pitch 8/16, 30° pressure angle, Ø41.38 mm dividing circle
• Control handle spline: 1/4-20 UNC-2A, 24 teeth, diametral pitch 64/128, OD 9.5 mm (SAE 1963)
• Mounting: 4 bolts M12, 25 mm depth; ports A / B 1 5/16-12; ports L1 / L2 1 5/8-12; spacing A6 66.7 mm / A7 31.8 mm
• Charge pressure 1.8–2.4 MPa; rotation direction R (clockwise) / L (anticlockwise)

Drawing technical requirement: minimum speed 500 r/min, maximum speed 2400 r/min, rated working pressure 30 MPa. Interface dimensions should be confirmed against the engineering drawing before installation.

Quality Control & Final Inspection

Quality control documentation for the LPV130-MA-R-23 is based on product identification, factory test records and engineering specifications. The test report documents the pump's displacement, pressure, speed, flow and output power recorded during closed-loop testing.

• Product model identification
• Hydraulic pump performance testing
• Pressure and speed verification
• Flow and displacement recording
• Torque and power measurement
• Overall and volumetric efficiency recording
• Engineering interface verification

Dimensional inspection · surface and finish inspection · assembly inspection · leakage inspection · rotation (R / L) inspection · port and interface inspection · final inspection before packing.

Project Reference

A project record documents the model for a customer located in Kyrgyzstan. The record lists Shandong Highland Hydraulic Seiko Co., Ltd. as manufacturer, a quantity of 50 units and a potato harvester application.

• Project: Variable Piston Pump for Kyrgyzstan
• Model: LPV130-MA-R-23
• Quantity: 50 units
• Application: Potato harvester
• Client: Kyrgyzstan
• Manufacturer: Shandong Highland Hydraulic Seiko Co., Ltd.
• Drive configuration: Closed circuit hydraulic system

Technical Documents

Technical documents available for the LPV130-MA-R-23 include:

The documents provide displacement, speed, pressure, torque, power, temperature and weight data, confirming the LPV130 as a closed axial piston pump. The listed documents are archived alongside the unit's component number.

Highland Hydraulic Motor Pump System FAQ

Q1. Can I have a sample order for hydraulic motor pump system?

A: Yes, we welcome sample order to test and check quality.

Q2. What about the hydraulic motor pump system lead time?

10 to 15 days for samples, mass production according to MOQ

Q3. Do you have any MOQ limit for hydraulic motor pump system?

A: Low MOQ, 1pc for sample checking is available.

Q4. How do you ship the hydraulic motor pump system and how long does it take to arrive?

Ship by sea, it generally takes 15-20 days to arrive, and air is also optional.

Q5. How to proceed an order for hydraulic motor pump system

A: Firstly let us know your requirements or application.

Secondly We quote according to your requirements or our suggestions.

Thirdly customer confirms the samples and places deposit for formal order.

Fourthly We arrange the production.

Q6: Do you offer guarantee for the hydraulic motor pump system?

A: Yes, we offer 1 years warranty to our products.

Q7: How to deal with the faulty hydraulic motor pump system?

Firstly, our products are produced in strict quality control system.Secondly, we will inspect the defective pump and motor, and then respond according to the actual situation.