42Mpa Corn Harvester Hydraulics Driving System High Efficiency
Product Summary
Highland Corn harvester hydraulic drive system higher efficiency Quick Detail: · Cast iron housing · Model PV110+MF110 · Hydraulic components · Power components of hydraulic systems · Place of sale worldwide · Higher efficiency · Simple layout · System Solutions · Application corn harvester ...
Product Custom Attributes
Corn Harvester Hydraulics Driving System
,42Mpa Hydraulics driving system
,High Efficiency Hydraulic Drive System
Basic Properties
Trading Properties
Product Description
Highland Corn harvester hydraulic drive system higher efficiency
Quick Detail:
· Cast iron housing
· Model PV110+MF110
· Hydraulic components
· Power components of hydraulic systems
· Place of sale worldwide
· Higher efficiency
· Simple layout
· System Solutions
· Application corn harvester hydraulic drive system
· Work fast
· Fully replace imported products
· Patent certificate certification
· 1 year warranty
Description:
Highland Corn harvester hydraulic drive system can contain most of the necessary circuit controls intrinsically by controlling the swash-plate angle, to regulate flow and pressure.
Highland Corn harvester hydraulic drive system high torque system user shall ensure that the hydraulic pump uses the correct formulation of the medium to ensure the cleanliness of the operating medium of the equipment, and shall not contain solid particles.
(Self-cleaning filters are recommended) and use this pump/motor wisely!
PV and MF Hydraulic Pumps Motors Series Technical parameter
| PV hydraulic pump and MF hydraulic motor series | 20 | 21 | 22 | 23 | ||
| Displacement | Max displacement | ml/r | 33.3 | 51.6 | 69.8 | 90.5 |
| Speed | Max continuous working speed (Full load condition) |
r/min | 3500 | 3500 | 3200 | 3200 |
| Rated speed | r/min | 2500 | ||||
| Min continuous working speed | r/min | 500 | ||||
| Pressure | Rated working pressure | Mpa | 35 | |||
| Max working pressure (transient) | Mpa | 42 | ||||
| Continuous working pressure | Mpa | 30 | ||||
| Allowable shell pressure (Absolute) | Mpa | Constant0.25, Peak value0.5 | ||||
| Torque | Continuous output torque (Under continuous working pressure) |
Nm | 162.3 | 252.3 | 342.6 | 432.9 |
| Max output torque | Nm | 227 | 353 | 480 | 606 | |
| Power | Continuous output power | KW | 45 | 79 | 107 | 139 |
| Max power | KW | 62 | 95 | 114 | 150 | |
| Temperature | Allowable shell temperature | ℃ | 80 | |||
| Max working temperature of oil tank | ℃ | 70 | ||||
| weight | PV series hydraulic pump hydraulic oil drain | kg | 45 | 53 | 63 | 78 |
| PV series hydraulic motor hydraulic oil drain | kg | 30 | 34 | 40 | 47 | |
Notices:
Hydraulic oil
The suitable replacement period for hydraulic oil in a sealed tank system is 2000 hours, and more often if the hydraulic oil is contaminated with water or other external materials or subjected to abnormal operating conditions.
As a general recommendation, the 10µ inlet oil filter should be replaced every spring or every 1500 hours (whichever occurs first) on a sealed tank system, or in an open tank system with an air filter fill cap. The oil filter should be replaced every 500 hours.
Heat Exchanger
The heat exchanger core and fins are kept clean at all times for maximum cooling and system efficiency, and the exterior of the heat exchanger is checked daily for blockages and cleaned as needed.
Tank:
The tank level and the water present in the oil should be checked daily. If the tank must be filled with oil, filtered hydraulic oil must be used, and all water in the tank must be removed as required.
Application:
Mixer truck: concrete mixer truck, cement mixer truck;
Coal mining machinery: scraper;
Industry: pharmaceutical machinery;
Transport vehicles: road rollers, concrete pump trucks, stabilized soil mixers
Factory Production & Inspection Evidence
The drive systems are built at the factory of Shandong Highland Hydraulic Seiko Co., Ltd., where unit identification and inspection records form part of normal production practice.
- Manufacturer: Shandong Highland Hydraulic Seiko Co., Ltd. (brand: Highland)
- Documented motor: MF20-21 closed-loop axial piston motor
- Documented Component No.: 02603250203005
- Documented project quantity: 20 units
- Closed-loop motor tested and inspection-recorded before release
The identification system allows a delivered unit to be matched to its production and test documentation.
Factory Performance Testing
Factory performance testing is carried out on a closed-loop hydraulic test bench, recording the motor's behaviour at several speed and pressure set points.
The supplied Closed-Loop Hydraulic Motor Test Report documents the MF20-21 motor (Component No. 02603250203005), tested at a temperature of 36.5 °C with a power recovery ratio of 10%. Rated displacement is 33.3 mL/rev, maximum continuous speed 3500 r/min and minimum continuous speed 500 r/min, with a rated working pressure of 35 MPa and a maximum (instantaneous) pressure of 42 MPa.
The test covers a range of operating points rather than a single condition.
Recorded Test Data
The following points were recorded during the closed-loop test run of the documented unit.
| Speed (r/min) | Pressure (MPa) | Flow (L/min) | Displacement (mL/rev) | Torque (N·m) | Input Power (kW) | Output Power (kW) | Overall Efficiency (%) | Volumetric Efficiency (%) |
|---|---|---|---|---|---|---|---|---|
| 1337 | 4.3 | 47 | 35.2 | 27 | 3.8 | 3.4 | 89.1 | 100 |
| 1337 | 14.3 | 45.7 | 35.2 | 85 | 11.9 | 10.9 | 91.5 | 97.2 |
| 1336 | 29.4 | 43.9 | 35.2 | 172 | 24.1 | 21.5 | 89.4 | 93.5 |
| 1311 | 4.3 | 47.1 | 35.9 | 25 | 3.4 | 3.4 | 98.3 | 100 |
| 1309 | 18.2 | 45.4 | 35.9 | 109 | 14.9 | 13.8 | 92.2 | 96.5 |
| 1308 | 30 | 44.2 | 35.9 | 181 | 24.8 | 22.1 | 89.1 | 94.1 |
Charge pressure: 1.5 MPa. Values are reproduced from the original test record and should be read together with the test bench's measurement and calculation method.
Quality Control & Inspection
Quality control relies on unit identification, test-bench verification and the engineering specification.
- Product model and unit identification
- Closed-loop hydraulic performance testing
- Pressure and speed verification
- Flow and displacement recording
- Torque and power measurement
- Overall and volumetric efficiency recording
- Engineering interface verification
In the supplied test record the run is signed by an operator and an auditor (Operator 003, Auditor 002). The product documentation also states that units are produced under a strict quality-control system, and that any defective pump or motor is inspected before a response is issued.
Engineering Drawing
The factory engineering drawing for the MF20-21 specifies the motor's ports, output shaft and rotation direction.
- High pressure ports A and B: 7/8-14 UNF-2B
- Leakage ports L1 / L2: 3/8-16 UNC-2B, 25 mm depth
- Measuring port M: 7/16-20 UNF-2B
- High pressure relief valves A and B: 35 MPa / 42 MPa
- Output shaft: 21-tooth involute spline, 16/32 radial pitch, 30° pressure angle, 33.34 mm dividing circle diameter
- Conical shaft lock nut: 1-20 UNEF-2B
- Rotation direction: CW / CCW
- Displacement marked on drawing: 33.4 mL/rev
Drawing technical requirement: minimum speed 500 r/min, maximum speed 3500 r/min, rated working pressure 30 MPa. Interface dimensions should be confirmed against the engineering drawing before installation.
Application / Project Evidence
The following project is recorded for the same closed-loop axial piston motor platform.
- Project: Variable Piston Pump for Saudi Arabia
- Model: MF20-21
- Quantity: 20 units
- Client: Saudi Arabia
- Application: Concrete mixer trucks
- Manufacturer: Shandong Highland Hydraulic Seiko Co., Ltd.
- Drive configuration: closed-circuit hydraulic system
The project is listed as evidence of the manufacturer's delivering experience; suitability for a specific machine should be confirmed before selection.
Technical Documents
Supporting technical documentation for the motor includes the documents listed below.
| Document | Availability |
|---|---|
| Technical Data Sheet | Available |
| Closed-Loop Motor Test Report | Available |
| Engineering Drawing | Available |
| Model Selection Table | Available |
Key rated values of the documented closed axial piston motor:
| Parameter | Value |
|---|---|
| Rated displacement | 33.3 mL/rev (max) |
| Max continuous speed | 3500 r/min |
| Rated speed | 2500 r/min |
| Min continuous speed | 500 r/min |
| Rated working pressure | 35 MPa |
| Max working pressure (instantaneous) | 42 MPa |
| Continuous working pressure (ΔP) | 30 MPa |
| Continuous output torque | 143 N·m |
| Maximum output torque | 167 N·m |
| Maximum power | 56 kW |
| Allowable shell temperature | -40 to 50 °C |
| Max oil tank temperature | 80 °C |
| Weight (MF series motor) | 34 kg |
| Circuit | Closed-loop |
These documents cover displacement, speed, pressure, torque, power, temperature and weight, and confirm the motor as a closed axial piston type.
FAQ
Q1. Can I have a sample order for corn harvester hydraulic drive system high torque system?
A: Yes, we welcome sample order to test and check quality.
Q2. What about the lead time?
10 to 15 days for samples, mass production according to MOQ
Q3. Do you have any MOQ limit for corn harvester hydraulic drive system high torque system?
A: Low MOQ, 1pc for sample checking is available.
Q4. How do you ship the goods and how long does it take to arrive?
Ship by sea, it generally takes 15-20 days to arrive, and air is also optional.
Q5. How to proceed an order for corn harvester hydraulic drive system high torque system?
A: Firstly let us know your requirements or application.
Secondly We quote according to your requirements or our suggestions.
Thirdly customer confirms the samples and places deposit for formal order.
Fourthly We arrange the production.
Q6: Do you offer guarantee for the products?
A: Yes, we offer 1 years warranty to our products.
Q7: How to deal with the faulty?
Firstly, our products are produced in strict quality control system.Secondly, we will inspect the defective pump and motor, and then respond according to the actual situation.
Contact Our Experts And Get A Free Consultation!
Our mission is to offer "High Quality" & "Good Service" & "Fast Delivery" to help our clients to gain more profits.
