Hmf110 42mpa Hydraulic Oil Motor / Hydraulic Piston Motors
Product Summary
Highland HMF110 Hydraulic Oil Motor Is Easy To Operate,Hydraulic Piston Motors Quick Detail: ·Cast iron housing ·Hydraulic components ·Model HMF130 ·Hydraulic system power components ·Principle hydraulic transmission ·Features easy maintenance ·Simple layout ·System Solutions ·Work fast ·Fully ...
Product Custom Attributes
42mpa hydraulic oil motor
,piston hydraulic oil motor
,42mpa hydraulic piston motors
Basic Properties
Trading Properties
Product Description
Highland HMF110 Hydraulic Oil Motor Is Easy To Operate,Hydraulic Piston Motors
Quick Detail:
·Cast iron housing
·Hydraulic components
·Model HMF130
·Hydraulic system power components
·Principle hydraulic transmission
·Features easy maintenance
·Simple layout
·System Solutions
·Work fast
·Fully replace imported products
·Patent certificate certification
·Application mobile crusher heavy duty hydraulic motors
·1 year warranty
Description:
Highland Heavy duty hydraulic motors features:
Highland Heavy duty hydraulic motors can be connected with other additional pumps.
When heavy duty hydraulic motors operated mechanically, the servo displacement can control and keep the angle of swash plate and pump displacement.
Upon release of the control handle, swash plate return to zero position automatically and the flow reduces to zero.
Highland heavy duty hydraulic motors have shaft oil seals performance, even at the lowest temperature and high case pressure.
We Highland hydraulic produce HMF110 closed loop circuit variable displacement duty Hydraulic motors for combine harvester hydraulic system. Our duty hydraulic motors have high volumetric efficiency, small leakage, high performance and high quality, which can work under high pressure, but their structure is complex and much high request on oil cleanliness.
Highland Heavy duty hydraulic motors can be connected with other additional pumps.
When heavy duty hydraulic motors operated mechanically, the servo displacement can control and keep the angle of swash plate and pump displacement.
Upon release of the control handle, swash plate return to zero position automatically and the flow reduces to zero.
heavy duty hydraulic motors have shaft oil seals performance, even at the lowest temperature and high case pressure.
HMF Series Technical parameter:
| HMF hydraulic pump and HMF hydraulic motor series | 110 | ||
| Displacement | Max displacement | ml/r | 110 |
| Speed | Max continuous working speed (Full load condition) | r/min | 2900 |
| Rated speed | r/min | 2500 | |
| Min continuous working speed | r/min | 500 | |
| Pressure | Rated working pressure | Mpa | 35 |
| Max working pressure (transient) | Mpa | 42 | |
| Continuous working pressure | Mpa | 30 | |
| Allowable shell pressure (Absolute) | Mpa | Constant0.25, Peak value0.5 | |
| Torque | Continuous output torque (Under continuous working pressure) | Nm | 535.3 |
| Max output torque | Nm | 749 | |
| Power | Continuous output power | KW | 149 |
| Max power | KW | 173 | |
| Temperature | Allowable shell temperature | ℃ | 80 |
| Max working temperature of oil tank | ℃ | 70 | |
| weight | HPV series hydraulic pump hydraulic oil drain | kg | 82 |
| HPV series hydraulic motor hydraulic oil drain | kg | 36 | |
Notices:
Hydraulic oil
The suitable replacement period for hydraulic oil in a sealed tank system is 2000 hours, and more often if the hydraulic oil is contaminated with water or other external materials or subjected to abnormal operating conditions.
As a general recommendation, the 10µ inlet oil filter should be replaced every spring or every 1500 hours (whichever occurs first) on a sealed tank system, or in an open tank system with an air filter fill cap. The oil filter should be replaced every 500 hours.
Heat Exchanger
The heat exchanger core and fins are kept clean at all times for maximum cooling and system efficiency, and the exterior of the heat exchanger is checked daily for blockages and cleaned as needed.
Application:
Mixer truck: concrete mixer truck, cement mixer truck;
Coal mining machinery: scraper;
Industry: pharmaceutical machinery;
Transport vehicles: road rollers, concrete pump trucks, stabilized soil mixers
HMF110 Engineering Drawing
The HMF110-23 uses the HMF110/130 series motor drawing. Its output shaft is an involute spline at 16/32 radial pitch with a 30° pressure angle. The SAE flange is fixed by four M12 bolts at a depth of 25 mm. High-pressure ports A and B use 7/8-14 UNF-2B threads; L1 and L2 are the leakage ports; the speed-sensor port is 7/8-14 UNF-2B; and the flushing- and relief-valve pressure taps measure 9/16-18, 15 mm deep. Both CW and CCW rotation are offered.
HMF110 Factory Production & Inspection Evidence
Prior to shipment each HMF110-23 passes through a documented production and inspection stage and is photographed on the factory floor; that evidence is recorded below.
Factory Evidence
- Hydraulic motor photographed on the factory floor before packing
- Housing and drive shaft visually checked prior to shipment
- Port and mounting arrangement verified to the HMF110 model specification
- Final inspection carried out per the product's technical requirements
Evidence Type: Factory Production / Visual Inspection
Application: Hydraulic oil motor / piston motor systems
Product Status: Production / Pre-shipment Inspection
HMF110 Factory Performance Testing
All HMF110-23 motors are performance-tested on the closed-loop bench ahead of delivery. Component No. 02411050203394 was run on 2024/11/5 8:38 at 21.8 ℃, at a 110 mL/rev rated displacement, a 2900 r/min maximum speed and a 38 MPa maximum pressure (rated 35 MPa). Its recorded power-recovery ratio is 50 %.
HMF110 Recorded Test Data
Test-bench data for the HMF110-23 motor, recorded as-is (component No. 02411050203394; 2024/11/5 8:38; 21.8 ℃; charge pressure 1.1 MPa):
| Speed n1 (r/min) | Pressure P2 (MPa) | Flow Q2 (L/min) | Displacement q2 (mL/rev) | Torque N1 (N·m) | Input Power P1 (kW) | Output Power P0 (kW) | Overall Eff. η (%) | Volumetric Eff. ηv (%) |
|---|---|---|---|---|---|---|---|---|
| 1288 | 6.9 | 143.3 | 111.3 | 145 | 19.6 | 17.3 | 88.3 | 100 |
| 1286 | 19.5 | 140.1 | 111.3 | 369 | 49.7 | 45.5 | 91.6 | 97.9 |
| 1283 | 30.1 | 137.8 | 111.3 | 561 | 75.4 | 69.1 | 91.7 | 96.5 |
| 1288 | 7.1 | 143.6 | 111.3 | -139 | -18.7 | 17 | -90.6 | 100.2 |
| 1286 | 18.5 | 140.8 | 111.3 | -343 | -46.2 | 43.4 | -94 | 98.4 |
| 1283 | 30.8 | 137.9 | 111.3 | -579 | -77.8 | 70.8 | -91 | 96.6 |
The values listed above are unaltered from the factory test report; charge pressure is held at 1.1 MPa.
HMF110 Quality Control & Inspection
Each HMF110-23 goes through an identical inspection route. On completion of assembly it is bench-run on the closed-loop motor stand, where displacement, working pressure, speed, flow and torque are recorded, overall and volumetric efficiency verified, and leakage checked; approval is given only if all values meet specification.
HMF110 Application / Project Evidence
The HMF110-23 closed axial piston motor was produced for a Russian wheat harvester project. The order — referred to internally as “Variable Piston Pump for Russia” — totalled 100 units shipped to a Russia-based customer, with Shandong Highland Hydraulic Seiko Co., Ltd. as the manufacturer. Within this product the motor powers hydraulic oil motor / piston motor systems through the closed-circuit hydrostatic drive. The details below are from that delivery's project records.
HMF110 Technical Documents
A set of technical documents supports the HMF110 motor, recording its performance ratings, test evidence and installation dimensions. The documents held for this product are listed below and are available to qualified buyers on request.
- HMF110 motor technical parameter sheet
- Closed-loop hydraulic motor test report (component No. 02411050203394)
- Engineering / outline drawing (HMF110/130 series)
- Model selection table (displacement and output shaft)
These documents can be requested through our sales team.
FAQ
Q1. Can I have a sample order for mobile crusher heavy duty hydraulic motors ?
A: Yes, we welcome sample order to test and check quality.
Q2. What about the lead time?
10 to 15 days for samples, mass production according to MOQ
Q3. Do you have any MOQ limit for mobile crusher heavy duty hydraulic motors ?
A: Low MOQ, 1pc for sample checking is available.
Q4. How do you ship the goods and how long does it take to arrive?
Ship by sea, it generally takes 15-20 days to arrive, and air is also optional.
Q5. How to proceed an order for mobile crusher heavy duty hydraulic motors ?
A: Firstly let us know your requirements or application.
Secondly We quote according to your requirements or our suggestions.
Thirdly customer confirms the samples and places deposit for formal order.
Fourthly We arrange the production.
Q6: Do you offer guarantee for the products?
A: Yes, we offer 1 years warranty to our products.
Q7: How to deal with the faulty?
A: Firstly, our products are produced in strict quality control system.Secondly, we will inspect the defective pump and motor, and then respond according to the actual situation
Contact Our Experts And Get A Free Consultation!
Our mission is to offer "High Quality" & "Good Service" & "Fast Delivery" to help our clients to gain more profits.
